Basic Info.
Ceiling Tile Shape
Square
Function
Fireproof Board Ceiling, Moisture-Proof Ceiling, Mould-Proof Ceiling, Waterproof Ceiling
Surface Treatment
Film Coating
Oxidation Resistance
Middle
Application
Office, Hotel, Household, Dust Free Room, Public
Transport Package
Carton Box or Carton Box with Wooden Pallet
Specification
300mm*600mm, 600mm*600mm, 600mm*1200mm.
Product Description
Choosing Saiyi
You will know that we are not just offer you goods price&service, but truly feel that we are sincerely solving your problem from design to construction.We are willing to be your accompany!
You will know that we are not just offer you goods price&service, but truely feel that we are sincerely solving your problem from design to construction. We are willing to be your accompany!
You will know that we are not just offer you goods price&service, but truly feel that we are sincerely solving your problem from design to construction.We are willing to be your accompany!
Product Feature Suspension Ceiling:
1.Design in square shape aluminum Suspension Ceiling
2.Deboss or emboss company logo is welcome
3.Surface treatment: powder coating, wooden grain, stone grain
4.Surface type: plain, perforation
Product Description Aluminum Ceiling Decoration
Standard dimension 600*600mm
Bevelled edges
Perforated panels with non-woven tissue for acoustic control
On site waste reduction with factory fabricated dimensional material
Downweight:reduce static load with lightweight aluminum or steel
Easy installation-no fasteners or tools required
Compatible with industry standard lighting: speaker, fire safety and security services
Product Specification Aluminum Ceiling Decoration
| Aluminum integrated Ceiling | Product Name | Aluminum ceiling |
| Size | 300*300mm,600*600mm,300*600mm,300*1200mm,600*1200mm or customized |
| Height | 20mm,25mm |
| Thickness | 0.5mm,0.6mm,0.7mm,0.8mm,0.9mm,1.0mm |
| Powder coating thickness | During 0.06mm, to 0.08mm(average thickness 0.06mm) |
| Pattern | Plain or perforated |
| Perforation Diameter | Φ0.8mm, Φ1.8mm, Φ2.3mm,Φ3.0mm etc. |
| Colour | Refer to RAL Color chart |
| Coating | Polyester powder, PE Coated, PVDF Powder |
| Packing | 30pcs/carton, in accordance with ceiling size |
| Packing Carton | 620*320*620mm, in accordance with size |
| Application | Hotel, office, station, hospital etc |
| Accessories for Clip in metal ceiling | Triangle keel
Hanger
Connector |
Product Specification Suspension Ceiling:
| Width(mm) | Length(mm) | Height(mm) | Thickness(mm) |
| 600 | 600 | 18/25 | 0.45~1.05 |
| 600 | 1200 | 18/25 | 0.6~1.05 |
| 300 | 600 | 18/25 | 0.4~1.05 |
| 300 | 1200 | 18/25 | 0.6~1.05 |
| 300 | 450 | 18/25 | 0.4~1.05 |
| 300 | 300 | 18/25 | 0.4~1.05 |
Our Services
1. We can provide you free samples within 3 days normally.
2. We provide OME and ODM services;
3. We can print customized logo and company info on carton box;
Our Advantage:
1. We have a complete production line to do all production processes which will reduce our cost;
2. We have big quantity of aluminum raw material in stock which will highly shorten the delivery time--Only need 5-7working days production time for 2,200sqm(One 20GP Container loading Ceiling);
3. We have strict inspection checking, those defective products will be filtered out;
4. We put our customers at the first place.
Clip-in(suspended) Ceiling Tiles Concept:
The Clip-in ceiling system(also called Dark frame or suspended aluminum ceiling) is useing the 1001/3003 grade aluminum raw material as basic material, applying our professional stretching and compression molding and other processing molding to process. It has high precision, stable shape and high surface flatness characteristics. Clip-in ceiling system is consist of decorative aluminum ceiling panels, installed keel and related accessories. The keel system is installed hiddenly in the back of the rectangular decorative ceiling and is not visible, that is why it is called
Installation for Aluminum Ceiling Suspension
***Preparation Work:
****Aluminum Ceiling Clip-in type
****Connect Triangle Carrier
****Suspension triangle carrier
****Expansion Screw M6
****Triangle carrier
****Hanger M6
****Suspension C38carrier
****C38carrier
****Connect C38 carrier
Step1: Cleaning the aluminum ceiling clip-in type and suspension C38 carrier
Step2:Measure the length of each wall in your room
***Use a tape measure to find the length of each wall in the room where you're installing your ceiling.Write the dimensions of your room either in a notebook or directly on the wall 2-3inch(5.1-7.6cm) from the top so you can easily reference them later.
***If your room is square or rectangular, you only need to measure the length and width.
Step3: Make a line between 4-6in(10-15cm) down from the tops of your walls.
**** Leave at least 4-6in(10-15cm) of space from the top of your wall to your line so you have room for fixtures and to put in your tiles. Use a 4ft(1.2m) level and draw a straight line with your pencil completely around your room.
****Snap a chalk line if you don't want to draw the lines on yourself. Hold the string of the chalk line against your wall and snap it so the line transfers onto the drywall.
****If you plan on installing a large fluorescent light panel, make your line 6in(15cm) down.
Step 4.Use a pair of tin snips to cut wall angles to the lengths of your walls.
Wall angles are long L-Shaped pieces used around the walls of your room to support the tiles and runners. Since wall angles are usually sold in 8-12ft(2.4-3.7m) lengths, trim them down with your tin snips to match the lengths of your walls.
****If you have a corner that just out from your wall, cut the wall angles going on those walls 1/2in(1.3cm) longer than your measurements
****If you want a mitered finish in the corners, cut the wall runner bottom-most wall angle at a 45-degree angle
****If your walls are longer than the wall angles, but 2 of them together by lining up the ends
Step5.Screw the wall angles into the studs along the line you drew.
****Use a stud finer to locate the studs in your walls and mark their locations with a pencil.Line up the top of the wall angle with the line you've drawn on the wall. Use 1 1/4in(3.2cm) screws and electric screwdriver where you marked the studs to secure your wall angles in place
****Double check that your wall angles are level as you install them
Tip:If a wall angle bows out, don't try to tighten it flat against the wall since it may warp the metal. Instead, keep the wall angle straight by placing a wooden shim between it and the wall. When your ceiling is completely finished, fill the gap in with caulk.
Accessories Suspension Ceiling
A-Shaped Carrier
Material:Steel
Surface treatment: Zincification
Height:40mm
Length:3000mm
Standard thickness:0.8mm | A-Shaped skeleton fitting
Material: Steel
Surface treatment:Zincification
Height:43mm
Length:70mm
Standard thickness:1.0mm | A-Shaped skeleton fitting
Material:Steel
Surface treatment: Zincification
Height:83/95mm
Standard thickness:1.0mm |
Triangular skeleton
Material:Steel
Surface treatment: Zincification
Height:25mm
Length:3000mm
Standard thickness:0.8mm | Main skeleton fitting
Material:Steel
Surface treatment: Zincification
Length:3000mm
Standard thickness:1.0mm | Triquetrous skeleton fitting
Materials:Steel
Surface treatment: Zincification
Height:90mm
Standard thickness:1.0mm |
Main skeleton
Material: Steel
Height:38/50mm
Length:3000mm
standard thickness:0.8mm | The main skeleton Hanger
Material: Steel
Surface treatment:Zincification
Height:95/105mm
Standard thickness:1.0mm | Main skeleton fitting
Material:Steel
Surface Treatment:Zincification
Height:41/53mm
Standard thickness:1.0mm |
M8 Hanger
Material:Steel
Surface treatment:Zincification | L-Shaped trimming angle
Material: Grade AA Aluminum alloy
Surface treatment: Electrostatic powder coating
Specification:25*25mm
Length:3000mm
Standard thickness:0.8mm | W-Shaped trimming angle
Material: Grade AA Aluminum alloy
Surface treatment: Electrostatic powder coating
Specifications:25mm*25mm*25mm
Length:3000mm
Standard thickness:0.8m |
Production Process
1.Roller Coating Production line1-roller coating production line2-powder coating workshop
punching&slicing cutting line1-punching&slicing cutting line 2- slicing cutting production-automatical machine of fabric sticking- screen printing production line- molding production line
Terms
1.Payment: 30%TT in advance, balance when copy of B/L
2.The delivery port:Shenzhen port, Guangzhou Port or other China Port
3.The delivery time: Within 15-20 working days after receiving the deposit payment
4.In the transport and storage process should pay attention to moisture and compressive deformation
Production Line for Aluminum Suspended Ceiling
Package for ceiling suspension
Packed in cartons with plastic bags protection
600X600 Carton size: 610X335X610mm, 30pieces per carton
300X300 Carton size: 650X350X360mm, 64pieces per carton
600X1200 Carton size: 1210X610X215mm, 20pieces per carton.
Delivery Time : 7-30 days after receiving the deposit.
Certification
Address:
Rm 3202, Bldg 2, Guangyuan Int′l Dist., No. 86, Zhuxi Rd., Nanning, Guangxi
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Established in 2008, Guangxi Nanning Saiyi Building Materials Co., Ltd., is a professional manufacturer and exporter that is concerned with the design, development and the production of aluminum ceilings, covering clip in ceilings, lay in ceilings, baffle ceilings, grid ceilings, strip ceilings, curtain wall, etc...We are located in Nanning, China, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in variety of different markets throughout the world.
Covering an area of 20, 046.5 square meters, we now have over 50 employees, boast and annual sales figure the exceeds USD three million and currently export 36 % of our production worldwide.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction. Besides, we have received ISO9001: 2008 Certificate, SGS, ISO10041, TUV, MA.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching the market of North America, Europe, Middle East, Southeast Asia, Africa, etc...
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
